The sweep-type sampling machine offers an economical, simple means to procure a representative sample directly from a main stream of material.
The Ramsey Model SWAX-7000 Primary Sweep Type Sampler can be used as a stand-alone sampling device to extract a cross belt cut to a sample container or as a primary (first stage cutter) in a multi-stage mechanical sampling system.
Features and Benefits
- Compact design is well-suited for low headroom installations
- Ease of installation results in modest installation costs
- Mounts directly to existing or new conveyors. No transfer point is required
- Rigid construction of tubular structural steel maintains positive alignment
- Direct drive for positive stopping whether the belt is loaded or empty
- Skirtboards on sampler prevent material spillage
- Cost-efficient—small primary increment means smaller, less expensive equipment in the reduction stages of system
- Non-contact proximity switches for start-stop control
- Replaceable steel brushes and urethane wiper assure fines will be removed and included in representative sample
- Samplers counterweighted to eliminate high eccentric loading on 36 in. and larger belts
Recommended for: Sampling of coal, limestone, ferrous and non-ferrous ores, sand, crushed rock and gravel
| Cat. No. | Description |
|---|---|
| 15378 | Primary Sweep Type Sampler
|
The sweep-type sampling machine offers an economical, simple means to procure a representative sample directly from a main stream of material.
The Ramsey Model SWAX-7000 Primary Sweep Type Sampler can be used as a stand-alone sampling device to extract a cross belt cut to a sample container or as a primary (first stage cutter) in a multi-stage mechanical sampling system.
Features and Benefits
- Compact design is well-suited for low headroom installations
- Ease of installation results in modest installation costs
- Mounts directly to existing or new conveyors. No transfer point is required
- Rigid construction of tubular structural steel maintains positive alignment
- Direct drive for positive stopping whether the belt is loaded or empty
- Skirtboards on sampler prevent material spillage
- Cost-efficient—small primary increment means smaller, less expensive equipment in the reduction stages of system
- Non-contact proximity switches for start-stop control
- Replaceable steel brushes and urethane wiper assure fines will be removed and included in representative sample
- Samplers counterweighted to eliminate high eccentric loading on 36 in. and larger belts
Recommended for: Sampling of coal, limestone, ferrous and non-ferrous ores, sand, crushed rock and gravel
| Cat. No. | Description |
|---|---|
| 15378 | Primary Sweep Type Sampler
|