FFThermo Scientific* Ramsey Oretronic III tramp metal detector provides an economical and reliable means to protect expensive crushers, conveyors and other process equipment from damage by tramp metal.
It detects all types of metallic scrap including bucket teeth, manganese steel mantles, bore crowns, bar scrap, chains and tools.
The Thermo Scientific Ramsey Oretronic III Tramp Metal Detector is designed especially for belt conveyors moving coal, iron pellets, minerals, aggregates and other bulk materials.
- Microprocessor-Based - No adjustments inside the enclosure. All functions accessed by the front panel
- Variable Frequency - Allows you to set the operating frequency. Interference and false trips from motors, radios and other devices are eliminated
- Quick Balance - Allows you to electronically balance the coil with the push of a key
- Single Coil (optional) - A single coil assembly with both generator and receiver coils in a single, under-the-belt coil assembly eliminates damage from high burden depths and interference from overhead metal objects
- New Coil Frame - Coils are mounted on a fiberglass support structure and made of impact resistant PVC. The entire support structure and coils are impervious to moisture
- Offset Swing Arm - Provides coil protection and reduces likelihood of coil breakage from high burden
- Serial Communications - RS-485 is available as standard to communicate with a remote PLC or remote front panel
- Distance Indication (optional) - With a speed sensor, the front panel display will show the distance from the coil to the tramp metal in tenths of feet
- Simple Installation - Can be installed without cutting the belt and without special tools or instruments
- Password Protection - Prevents unwanted access by entering your personal PIN
Recommended for: Conventional metal detectors producing an unacceptable false alarm rate.
| Thermo Scientific Ramsey Oretronic III Specifications | |
|---|---|
| Belt speed | 1.5 m/min to 366 m/min (5 ft/min to 1,200 ft/min) |
| Power | |
| Line voltage | Switch selectable; 117VAC -15% +10%, 234VAC -15% +10% |
| Line frequency | 48 - 62Hz |
| Maximum power required | 30VA |
| Display | |
| Type | Light Emitting Diode (LED) |
| Digits | 7-segment upper display character; Alpha-numeric lower display |
| Alarm outputs | |
| Type | Delay contacts; NO and NC contacts provided |
| Output rating | Relay isolated; 700 Vrms max |
| Environmental | |
| Humidity | Up to 95% R.H. non-condensing |
| Temperature ranges | Storage: -55°C to +100°C (-67°F to +212°F)ambient;
Operating: -40°C to +50°C (-40°F to +122°F) |
| Control unit enclosure | |
| Construction | Reinforced fiberglass conforms to NEMA 4X. Optional NEMA 4/9 for hazardous areas |
| Size | 38.7 cm x 33.7 cm x 19 cm (15.25 in x 13.25 in x 7.5 in) |
| Serial communication | RS-485 serial communication configured in Modbus protocol |
| Coil and support assembly | |
| Construction | FRP reinforced support assembly; Coils sealed in PVC |
| Manufacturing quality | ISO-9001 Certified |
| Cat. No. | Description |
|---|---|
| 15328 | 1.5 m/min to 366 m/min (5 ft/min to 1,200 ft/min) |
FFThermo Scientific* Ramsey Oretronic III tramp metal detector provides an economical and reliable means to protect expensive crushers, conveyors and other process equipment from damage by tramp metal.
It detects all types of metallic scrap including bucket teeth, manganese steel mantles, bore crowns, bar scrap, chains and tools.
The Thermo Scientific Ramsey Oretronic III Tramp Metal Detector is designed especially for belt conveyors moving coal, iron pellets, minerals, aggregates and other bulk materials.
- Microprocessor-Based - No adjustments inside the enclosure. All functions accessed by the front panel
- Variable Frequency - Allows you to set the operating frequency. Interference and false trips from motors, radios and other devices are eliminated
- Quick Balance - Allows you to electronically balance the coil with the push of a key
- Single Coil (optional) - A single coil assembly with both generator and receiver coils in a single, under-the-belt coil assembly eliminates damage from high burden depths and interference from overhead metal objects
- New Coil Frame - Coils are mounted on a fiberglass support structure and made of impact resistant PVC. The entire support structure and coils are impervious to moisture
- Offset Swing Arm - Provides coil protection and reduces likelihood of coil breakage from high burden
- Serial Communications - RS-485 is available as standard to communicate with a remote PLC or remote front panel
- Distance Indication (optional) - With a speed sensor, the front panel display will show the distance from the coil to the tramp metal in tenths of feet
- Simple Installation - Can be installed without cutting the belt and without special tools or instruments
- Password Protection - Prevents unwanted access by entering your personal PIN
Recommended for: Conventional metal detectors producing an unacceptable false alarm rate.
| Thermo Scientific Ramsey Oretronic III Specifications | |
|---|---|
| Belt speed | 1.5 m/min to 366 m/min (5 ft/min to 1,200 ft/min) |
| Power | |
| Line voltage | Switch selectable; 117VAC -15% +10%, 234VAC -15% +10% |
| Line frequency | 48 - 62Hz |
| Maximum power required | 30VA |
| Display | |
| Type | Light Emitting Diode (LED) |
| Digits | 7-segment upper display character; Alpha-numeric lower display |
| Alarm outputs | |
| Type | Delay contacts; NO and NC contacts provided |
| Output rating | Relay isolated; 700 Vrms max |
| Environmental | |
| Humidity | Up to 95% R.H. non-condensing |
| Temperature ranges | Storage: -55°C to +100°C (-67°F to +212°F)ambient;
Operating: -40°C to +50°C (-40°F to +122°F) |
| Control unit enclosure | |
| Construction | Reinforced fiberglass conforms to NEMA 4X. Optional NEMA 4/9 for hazardous areas |
| Size | 38.7 cm x 33.7 cm x 19 cm (15.25 in x 13.25 in x 7.5 in) |
| Serial communication | RS-485 serial communication configured in Modbus protocol |
| Coil and support assembly | |
| Construction | FRP reinforced support assembly; Coils sealed in PVC |
| Manufacturing quality | ISO-9001 Certified |
| Cat. No. | Description |
|---|---|
| 15328 | 1.5 m/min to 366 m/min (5 ft/min to 1,200 ft/min) |