Produk » Gundlach

4000 Series Roll Crushers

Kategori : Roll Crushers

The First and Only Roll Crushers Able to Size Coal, Salts, Potash, Lime and Soft Minerals in 3 Dimensions

Gundlach roll crushers are available in four model series with single-stage and two-stage designs. Rolls range from 300 mm to 900 mm, with roll lengths 500 mm to 3000 mm, and feeds up to 1200 mm and product sizes to 6 mm.
These roll crushers are available with Gundlach's breakthrough 3-D crushing technology that includes intermeshing continuous tooth roll design and positive roll timing that delivers the industry's best dimensional product control, fewer fines and elimination of over-size material. Gundlach's roll crushers deliver higher quality cubical product, minimal fines and consistently repeatable performance for sizing coal, coke, glass, fertilizer, potash, salts, lime, limestone, soft ores, friable materials and industrial minerals.

Roll Crusher Overview

Materials Crushed

  • Coal: from ROM coal to clean coal, lignite (brown coal), bituminous, sub-bituminous, and Anthracite including frozen agglomerates
  • Coke: petroleum coke, metallurgical coke, green or calcined
  • Glass: cullet or bottles, plate glass, overrun glass on production line
  • Fertilizer and potash: MAP, DAP, potash ore and flake among others
  • Salts: rock salt, solar salt, KCl, NaCl
  • Lime and limestone: soft to medium limestone and dolomites for sorbent in boiler application, burnt lime, ag lime, hydrated lime
  • Soft ores: shales, clays, phosphates, oil shale
  • Friable materials: ash, boiler slag, nuts and nut shells, cement clinker, ceramic floor tiles
  • Minerals: kernite, borax, caliche, bauxite, phosphate, talc
  • Hard to handle materials such as graphite electrodes, hot material, and sticky materials
  • Hot iron sinter

Roll Crusher Capacities

  • Feed size: up to 1200 mm in size
  • Product sized to: typical products are 100 mm, 50 mm, 38 mm, down to 6 mm depending on feed size
  • Throughput: from as low as 10 TPH up to over 6000 TPH, depending on material, feed size and product size

4000 Series Roll Crushers

  • Single-stage and two-stage models
  • 24" (610 mm) and 30" (762 mm) diameter rolls
  • Roll face up to 100" (2540 mm) wide
  • For sizing materials with compressive strength up to 18,000 PSI (124 Mpa)